USB-C Connector – Gold
This USB-C 2.0 Gold connector will work perfectly on any custom cable build, a DIY project or, bringing life back to an old dead cable. It consists of a small PCB and two metal parts that make up the shell.
Out of stock
Model: USB-C Connector – Gold
Type: Device Side (Keyboard Side)
Pieces: 3 pieces
Please contact us if you require more than 20 connectors.
This USB-C 2.0 gold connector will work perfectly on any cable build or DIY project. It consists of a small PCB and two metal parts that make up the shell. The PCB has four solder pads to solder the wires on. The PCB also has clear markings to show you exactly which solder pads to use. Pads that are marked “V” and “G” are used for the power wires and the pads that are marked “D+” and “D-” for data wires. The shell can easily be installed over the PCB once the four wires have been soldered on. Use pliers to crimp the shell tightly around the cable.
USB-C connectors come in two types, namely Host and Device. A Host connector you will use to plug into a PC and a Device connector you will use to plug into a keyboard. A USB-C to USB-C cable will need one Device connector and one Host connector. Please contact us if you need a Host side connector.
Use a small piece of electric tape or hot glue on the soldered pads before installing the shell. This is to prevent the soldered pads from making contact with the shell.
Read more on our Resources page.
Only logged in customers who have purchased this product may leave a review.